Depending on the selected resistance, cartridges are available in top-fill or side-fill formats. UK versions hold 2ml of e-liquid and are commonly supplied in packs of three.
Key Features
- 2ml refillable capacity for UK versions
- Improved Geekvape VPU coil technology
- Built-in mesh coil in each cartridge
- 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω options
- Supports MTL and RDL vaping
- Top-fill and side-fill versions available
- 0.4Ω rated at 25–30W
- 0.6Ω rated at 18–25W
- 0.8Ω rated at 12–18W
- 1.2Ω rated at 8–12W
- Designed for nic salt, freebase and 50/50 e-liquids
- Leak-resistant cartridge design
- Ergonomic mouthpiece design
- No separate coil replacement required
- Commonly supplied as a 3-pack
Geekvape Q V2 Pod Specifications
| Brand | Geekvape |
|---|---|
| Product | Geekvape Q V2 Replacement Pod Cartridges |
| Product Type | Refillable Fixed-Coil Replacement Pod |
| UK Pod Capacity | 2ml |
| Coil Type | Built-In Mesh Coil |
| Technology | Improved VPU Coil Technology |
| Resistance Options | 0.4Ω / 0.6Ω / 0.8Ω / 1.2Ω |
| 0.4Ω Power Range | 25–30W |
| 0.6Ω Power Range | 18–25W |
| 0.8Ω Power Range | 12–18W |
| 1.2Ω Power Range | 8–12W |
| Fill Style | Top Fill / Side Fill, Depending on Variant |
| Vaping Style | MTL / RDL |
| Suitable E-Liquids | Nic Salt / Freebase / 50/50 E-Liquids |
| Refillable | Yes |
| Separate Coil Replacement | Not Required |
| Pods Per Pack | 3 |
Improved VPU Coil Technology
The Q V2 cartridge range uses Geekvape’s updated VPU coil technology, combining the heating element and cartridge into a single replaceable unit.
The revised design is intended to improve e-liquid absorption and help reduce leakage around the cartridge while maintaining consistent vapour and flavour during normal use.
0.4Ω, 0.6Ω, 0.8Ω & 1.2Ω Options
0.4Ω & 0.6Ω RDL Pods
The 0.4Ω cartridge is rated at 25–30W for the most open draw in the range, while the 0.6Ω option operates at 18–25W for Restricted Direct Lung vaping.
0.8Ω & 1.2Ω MTL Pods
The 0.8Ω cartridge runs at 12–18W for a looser MTL draw. The 1.2Ω pod operates at 8–12W and provides the tightest Mouth To Lung option in the range.
Geekvape Q V2 Top-Fill Pods
The Q V2 top-fill cartridge uses an e-liquid port positioned near the top of the pod, allowing it to be refilled without removing the cartridge from a compatible device.
Current top-fill options include 0.6Ω, 0.8Ω and 1.2Ω resistances, covering RDL through to tighter MTL use.
Geekvape Q V2 Side-Fill Pods
Side-fill cartridges use a dedicated filling port on the side of the pod. Current UK listings include 0.4Ω, 0.6Ω and 0.8Ω side-fill V2 options.
The lower-resistance 0.4Ω version is designed for a more open RDL draw and requires a compatible device capable of operating within its 25–30W power range.
MTL & RDL Vaping
The Q V2 range covers both Mouth To Lung (MTL) and Restricted Direct Lung (RDL) vaping depending on the resistance installed.
Higher-resistance 0.8Ω and 1.2Ω cartridges provide tighter draws at lower wattages, while 0.4Ω and 0.6Ω versions produce a more open inhale and operate at higher output.
Choosing E-Liquid For Geekvape Q V2 Pods
Geekvape Q V2 cartridges are suitable for nicotine salts, freebase and balanced 50/50 e-liquids, although the best pairing depends on pod resistance and vaping style.
The higher-resistance 0.8Ω and 1.2Ω options are particularly suited to lower-power MTL setups, while 0.4Ω and 0.6Ω pods operate at higher wattages for a looser draw.
Geekvape Q V2 Pod Compatibility
The Q V2 cartridge platform is compatible with a wide range of Geekvape Q-series devices, including models from the Sonder Q, Wenax Q, Digi Q, AQ and Aegis Hero Q families.
Compatibility varies by resistance. The 0.4Ω side-fill cartridge is specifically listed for the Wenax Q Pro, Wenax Q Ultra, Sonder Q2 and Sonder Q3, and should not be assumed to fit every Q-series device.
Available Geekvape Q V2 Pod Options
- 0.4Ω Side Fill
- 0.6Ω Top Fill
- 0.6Ω Side Fill
- 0.8Ω Top Fill
- 0.8Ω Side Fill
- 1.2Ω Top Fill
How To Fill & Replace Geekvape Q V2 Pods
- 1Select a Q V2 cartridge resistance and fill style that is compatible with your Geekvape device.
- 2Open the filling port according to the selected top-fill or side-fill cartridge design.
- 3Add suitable e-liquid without exceeding the cartridge’s 2ml capacity.
- 4Close the filling port securely after filling.
- 5Allow a newly filled cartridge to saturate according to the supplied Geekvape instructions before first use.
- 6Insert the cartridge securely into the compatible Geekvape device.
- 7Use the cartridge within its recommended power range where the device provides adjustable wattage.
- 8Replace the complete pod when flavour or vapour performance noticeably declines.
What’s Included?
- 3 x Geekvape Q V2 2ml Refillable Pod Cartridges
- 1 x Warranty / Collection Card
Why Choose Geekvape Q V2 Replacement Pods?
The Q V2 range keeps coil replacement simple by integrating the mesh heating element directly into the cartridge. Routine maintenance consists of refilling the pod and replacing the complete cartridge when its coil is worn.
Multiple resistance options allow the same cartridge family to cover tighter MTL and more open RDL vaping, while top-fill and side-fill designs give users a choice over how they refill.
The 2ml UK format, improved VPU technology and three-pod packs also make the Q V2 range a practical replacement option for customers already using compatible Geekvape Q-series devices.
Safety Information
- This product is intended for adults aged 18 and over only.
- The empty cartridge contains no nicotine, but e-liquid used with it may contain nicotine.
- Check resistance and device compatibility before use.
- Use the recommended power range for the selected cartridge.
- Do not use a pod that is cracked, leaking or physically damaged.
- Ensure the filling port is securely closed before vaping.
- Do not overfill the cartridge beyond its 2ml capacity.
- Keep pods and e-liquid away from children and pets.
- Avoid contact between e-liquid and the skin or eyes.
- Dispose of used cartridges responsibly.
Reviews
There are no reviews yet.