Al Fakher Hypermax Prime 50K Prefilled Pod Kit

The Al Fakher Hypermax Prime 50K Prefilled Pod Kit is a rechargeable prefilled vape system built around a reusable 1000mAh battery and replaceable Snap Dual pod module. It is designed for adult users who want a higher-capacity prefilled setup without manually filling e-liquid or installing separate coil heads.

The system uses two separate 10ml prefilled refill containers that connect to the pod module. Together they provide 20ml of prefilled e-liquid across the complete system and are rated for up to approximately 50,000 puffs. Actual usage will vary according to draw length, airflow setting and individual vaping frequency.

The current UK specification lists 20mg/ml nicotine salt e-liquid, a 0.6Ω mesh coil, adjustable airflow, draw activation and a 1000mAh rechargeable battery with USB Type-C charging.

Key Features

• Up to approximately 50,000 puffs
• Built-in 1000mAh rechargeable battery
• 2 x 10ml prefilled refill containers
• 20ml total e-liquid across separate containers
• 20mg/ml nicotine salt e-liquid
• Replaceable Snap Dual pod module
• Integrated 0.6Ω mesh coil
• Fresh coil supplied with each compatible replacement pod module
• USB Type-C charging
• Quick Charge 2.0 listed by current UK retailer specification
• Silk Glow inhale-activated display
• Adjustable airflow
• Draw-activated operation
• No manual e-liquid filling required
• No separate coil installation required
• Rechargeable battery device retained between pod changes

Al Fakher Hypermax Prime 50K Specifications

How the Hypermax Prime 50K System Works

The Hypermax Prime separates the rechargeable battery from the consumable pod-and-refill section.

• Two 10ml prefilled refill containers supply the e-liquid.
• The refill containers connect to the Snap Dual pod module.
• The mesh coil is housed inside the replaceable pod module.
• The complete pod section attaches to the rechargeable battery device.

Once the refill supply and coil have reached the end of their usable life, the compatible pod module is replaced while the 1000mAh battery device is retained.

Up to 50,000 Puffs

The Al Fakher Hypermax Prime 50K is rated for up to approximately 50,000 puffs across its full prefilled e-liquid supply.

This figure is an estimated maximum rather than a guaranteed number of inhalations. Longer draws, more open airflow and frequent use can reduce the total number of puffs achieved.

1000mAh Rechargeable Battery

The device contains a built-in 1000mAh rechargeable battery, providing the reusable electronic part of the Hypermax Prime system.

Charging is handled through a USB Type-C connection. Current retailer specifications also list Quick Charge 2.0 support, allowing the device to be topped up between pod changes without replacing the battery section.

Snap Dual Pod Module

The Snap Dual pod module holds the coil and connects with the two prefilled refill containers.

Unlike systems where the coil remains permanently attached to the battery, the Hypermax Prime places the mesh coil inside the replaceable pod module. When a compatible replacement module is fitted, the coil is renewed at the same time as the e-liquid supply.

0.6Ω Mesh Coil

The current UK specification lists a 0.6Ω mesh coil inside the replaceable pod module.

Mesh heating spreads heat across a wider surface area than traditional round-wire designs, helping maintain consistent vapour production during normal use.

Adjustable Airflow

An airflow control allows the draw to be tightened or opened according to preference.

A more restricted setting provides a tighter inhale, while opening the airflow produces a looser draw with increased airflow through the pod system.

Silk Glow Display

The Hypermax Prime includes a Silk Glow display that illuminates during use and provides battery-status information.

The screen is activated during inhalation rather than remaining permanently illuminated.

Draw-Activated Operation

The device activates automatically when you inhale through the mouthpiece, so there is no traditional fire button required during normal use.

Once the pod system is assembled correctly and attached to the battery, operation is handled through the inhale-activated system.

Available Al Fakher Hypermax Prime 50K Flavours

• Blue Razz Lemonade
• Cherry Fiesta
• Cool Mango
• Grape Mint
• Gum Mint
• Lemon Lime & Cherry Fizz
• Lemon Mint
• Love
• Lush Ice
• Magic Love
• Mango Pineapple
• Mint
• Peach Ice
• Strawberry Punch
• Two Apple
• Watermelon Kiwi

The list above follows the flavour options supplied for this Pure Vaper listing. Current stock should always be confirmed through the WooCommerce variation selector.

How to Use the Al Fakher Hypermax Prime 50K

1. Remove the rechargeable device, pod module and refill containers from the packaging.
2. Remove any protective seals, caps or transit plugs shown in the supplied instructions.
3. Connect the two prefilled refill containers to the Snap Dual pod module as directed.
4. Attach the assembled pod module securely to the rechargeable device.
5. Allow the internal coil to become saturated after initial assembly where required by the supplied instructions.
6. Adjust the airflow to your preferred draw.
7. Inhale through the mouthpiece to activate the device.
8. Monitor the display for battery status.
9. Recharge through USB Type-C when required.
10. Replace the depleted pod module and refill containers with compatible Hypermax Prime 50K replacements.

Al Fakher Hypermax Prime 50K Replacement Pods

The rechargeable battery is designed to remain in use with compatible Al Fakher Hypermax Prime 50K replacement pod modules.

The replacement pod system provides a fresh mesh coil alongside the consumable e-liquid components, so there is no need to install a separate coil head manually.

Al Fakher Hypermax 30K replacement pods should not be assumed to be compatible with the Hypermax Prime 50K because the two systems use different pod designs.

What’s Included?

• 1 x Al Fakher Hypermax Prime 50K Rechargeable Device
• 1 x Snap Dual Pod Module with Integrated Mesh Coil
• 2 x 10ml Prefilled Refill Containers

Charging cable inclusion varies between retailer listings, so only list a USB-C cable as included after checking the physical Pure Vaper supplier batch.

Why Choose the Al Fakher Hypermax Prime 50K?

The Hypermax Prime 50K is built around a reusable 1000mAh battery and replaceable pod module, allowing the electronic device to remain in use while the consumable e-liquid and coil section are changed.

Its main practical features are the two 10ml refill containers, replaceable 0.6Ω mesh coil module, adjustable airflow, draw activation and battery display. These give the system more flexibility than a basic fixed-airflow prefilled pod kit while keeping manual filling and separate coil changes out of the setup.

Safety Information

• This product contains nicotine, which is an addictive substance.
• For adults aged 18 and over only.
• Keep the device, pods and e-liquid away from children and pets.
• Use only compatible Al Fakher Hypermax Prime 50K replacement components.
• Do not manually refill sealed refill containers.
• Do not puncture, open or modify the pod module or refill containers.
• Do not use damaged or leaking components.
• Avoid direct skin and eye contact with leaking e-liquid.
• Keep the charging port dry.
• Use a suitable USB Type-C charging source.
• Do not leave the device charging unattended.
• Do not dismantle, crush or modify the built-in battery.
• Stop using the device if it becomes damaged, swollen or unusually hot.
• Keep away from excessive heat, open flames and prolonged direct sunlight.
• Dispose of depleted pods and electronic components responsibly.
• Puff counts are approximate and vary according to individual use and airflow setting.